BPARAMETER command
The BPARAMETER command is used to add a parameter with grips to a dynamic block definition.
Command Access:
Command : BPARAMETER
Command Prompts:
Enter parameter type [Alignment/Base/Point/Linear/Polar/Xy/Rotation/Flip/Visibility/looKup]:
Function Description:
This command could only be used in block editor. The parameter is used to define custom property for block reference. The added parameter must be associated with a certain action to form a dynamic block.
Relative Glossary:
Alignment:
Rotate block reference around a certain point to align it with other objects.
Specify base point : Specify base point, the block reference will rotate around this point to align with another object.
Name : Set "name" custom property of this parameter.
Specify alignment direction : Specify alignment angle of block reference.
Type : Specify alignment type, perpendicular, or tangent.
Base:
Specify a changeable base point for geometry graph in dynamic block reference.
Specify parameter location:
Specify a default base point location for block definition base. This is the location for base grip in block definition.
Point :
Define custom x and y properties of block reference.
Specify parameter location : Specify x and y parameter location in block definition. This is the location for base grip in the block reference.
Name : Specify name.
Label : Specify a custom description label to define parameter location.
Chain : Determine whether the parameter is contained in other associated action selection set or not.
Yes : if one parameter is associated with more than one action and one of those actions is edited; other associated actions will be activated.
No : if one parameter is associated with more than one action and one of those actions is edited; other associated actions will not be activated.
Description : Extend description of custom property for "label".
Palette : Determine the "label" custom property displaying in "property" palette or not when specifying graph in block reference.
Linear:
Specify distance between two key points in block definition.
Specify start point : Specify a key point for parameter in block definition.
Name : Specify name.
Label : Specify a custom description label to define parameter location.
Chain : Determine whether the parameter is contained in other associated action selection set or not.
Yes : if one parameter is associated with more than one action and one of those actions is edited; other associated actions will be activated.
No : if one parameter is associated with more than one action and one of those actions is edited; other associated actions will not be activated.
Description : Extend description of custom property for "label".
Base : Specify "base location" property for the parameter.
Start point : Edit the start point of parameter in block reference, the start point of parameter keeps still.
Midpoint : The middle point of parameter keeps still. The start point and endpoint of parameter move the same distance to middle point at the same time..
Palette:
Prompt to display property in Properties palette or not.
Value set:
Limit available value of parameter to specified value in set.
None:
Edit the start point of parameter in block reference, the start point of parameter keeps still.
List:
Specify available value list for block reference. Increment:
Specify parameter increment, maximum, and minimum value in block reference.
Specify label location:
Specify label location.
Enter number of grips:
Specify number of grips displaying in block reference.
0 : display no grip in block reference. Users could edit selected geometry graph in "property" palette or "property query table".
1 : grips display on the endpoint of parameter.
2 : grips only display on the start point and endpoint of parameter.
Polar:
Specify distance and angle between two key points in block definition.
Start point : Specify a point for reference to place grip in block definition.
Name : Specify name.
Label : Specify a custom description label to define parameter location.
Chain : Determine whether the parameter is contained in other associated action selection set or not.
Yes : if one parameter is associated with more than one action and one of those actions is edited; other associated actions will be activated.
No : if one parameter is associated with more than one action and one of those actions is edited; other associated actions will not be activated.
Description : Extend description of custom property for “label”.
Palette : Prompt to display property in Properties palette or not.
Value set : Limit available value of parameter to specified value in set.
None : No available value.
List : Specify available value list for block reference.
Increment : Specify parameter increment, maximum, and minimum value in block reference.
Specify endpoint : Specify endpoint to determine distance and angle. The distance and angle are custom properties in “Property” palette.
Specify label location : Specify label location.
Enter number of grips [0/1/2] <2> : Specify number of grips displaying in block reference.
0 : display no grip in block reference. Users could edit selected geometry graph in “property” palette or “property query table”.
1 : grips display on the endpoint of parameter.
2 : grips only display on the start point and endpoint of parameter.
Xy:
Define the x and y distance from base point in block definition.
Start point : Specify the maximum x distance of parameter.
Name : Specify name.
Label : Specify a custom description label to define parameter location.
Chain : Determine whether the parameter is contained in other associated action selection set or not.
Yes : if one parameter is associated with more than one action and one of those actions is edited; other associated actions will be activated.
No : if one parameter is associated with more than one action and one of those actions is edited; other associated actions will not be activated.
Description : Extend description of custom property for “label”.
Palette : Prompt to display property in Properties palette or not.
Value set : Limit available value of parameter to specified value in set.
None : No available value.
List : Specify available value list for block reference.
Increment : Specify parameter increment, maximum, and minimum value in block reference.
Specify endpoint : Specify the maximum y distance of parameter.
Enter number of grips [0/1/2/4] <1> : Specify number of grips displaying in block reference.
0 :display no grip in block reference. Users could edit selected geometry graph in “property” palette or “property query table”.
1 : grips display on the endpoint of y distance.
2 : grips display on two endpoints.
4 : grips display on all of four corner points.
Rotation: Define rotation angle of block reference.
Start point : Specify rotation point for selected geometry graph.
Name : Specify name.
Label : Specify a custom description label to define parameter location.
Chain : Determine whether the parameter is contained in other associated action selection set or not.
Yes : if one parameter is associated with more than one action and one of those actions is edited; other associated actions will be activated.
No : if one parameter is associated with more than one action and one of those actions is edited; other associated actions will not be activated.
Description : Extend description of custom property for “label”.
Palette : Prompt to display property in Properties palette or not.
Value set : Limit available value of parameter to specified value in set.
None : No available value.
List : Specify available value list for block reference.
Increment : Specify parameter increment, maximum, and minimum value in block reference.
Specify radius of parameter : Specify distance from parameter base point to grips.
Specify default Rotation Angle : Specify grip position in block reference.
Base angle : Specify base angle value except 0 for parameter grip.
Specify label location : Specify label location.
Enter number of grips [0/1] <1> : Specify number of grips displaying in block reference.
0 :display no grip in block reference. Users could edit selected geometry graph in “property” palette or “property query table”.
1 : grip displays on the endpoint.
Flip : Mirror selected object or the whole block reference by the reflection line.
Base point of reflection line : Specify a reflection line for mirroring objects or the whole block reference.
Name : Specify name.
Label : Specify a custom description label to define parameter location.
Description : Extend description of custom property for “label”.
Palette : Prompt to display property in Properties palette or not.
Specify the endpoint projection lines : Specify the endpoint of reflection line.
Specify label location : Specify label location.
Enter number of grips [0/1] <1> : Specify number of grips displaying in block reference.
0 : display no grip in block reference. Users could edit selected geometry graph in “property” palette or “property query table”.
1 : grip displays on the endpoint.
Visibility : Define visible object or invisible object in block definition.
Specify parameter location : Specify grip location. The parameter could be located anywhere in block definition.
Name : Specify name.
Label : Specify a custom description label to define parameter location.
Description : Extend description of custom property for “label”.
Palette : Prompt to display property in Properties palette or not.
looKup : Define custom parameter that determined by lookup table.
Specify parameter location : Specify parameter location.
Name : Specify name.
Label : Specify a custom description label to define parameter location.
Description : Extend description of custom property for “label”.
Palette : Prompt to display property in Properties palette or not.
Related tutorial video:
- Bedit command 00:34
- Bparameter command 00:49
- Status bar related setting 01:00
- Bactiontool command 01:54
- Block command 02:45
- Dynamic block creation 03:12
- Insert command 04:12
Above video sources from TUTORIAL - GETTING STARTED WITH GSTARCAD, enrol now for free.