GstarCAD 2016 Upgrade - Hardware-encryption. Type 1 - Standalone
Dongle upgrade procedures
- Download GstarCAD Dongle Update tool.exe from attachment or gstarcad download page.
- Launch the Dongle update software on the computer which have the dongle.
Click ONLY GETSN ; it will generate a .lov file, save this, and email to us.
This is to avoid any confusion or delay in the process of upgrading the dongle.
e.g. xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx.lov
Once we have the .lov file, we will provide you with a reply within 1-3 working days with the response file (.liv). Here are the procedures on how to reprogram your dongle to be able to support GstarCAD 2016.
Procedures ;
- Use the same dongle update software.
- Plug in the correct dongle only with the same serial number > click GET UPDATE FILE. > browse to the same serial number .liv file
Download and Install GstarCAD 2016:
1 ; Download GstarCAD2016_xxx_x64.exe for 64 bits windows or GstarCAD2016_xxx_x86.exe if you are using 32bits Windows. (gstarcad download page)
2 : Install and run GstarCAD 2016 > with your dongle plugged in > choose the version you are using >NEXT > Standalone > Hardware encryption > Next.
Click here If you need GstarCAD 2016 installation Guide.