Rotate Cursors
The cursor can rotate anti-clockwise by 0 degree or 45 degree.
Menu : Express>GstarCAD Tools>Rotate Cursor>0 or 45
Command Entry : RTCUR0/RTCUR45
0 degree/45 degree
Side Line
Menu : Express>GstarCAD Tools>Rotate Cursor>Side Line
Command Entry : RTCUR1
Operation steps:
1. Start the command.
2. Select the reference segment and system will align the X axis of the cursor to the selected segment.
Real Time Rotate
Menu : Express>GstarCAD Tools>Rotate Cursor>Real Time Rotate
Command Entry : RTCUR
Operation steps:
- After executing the command, the command line prompts as below.
2. You can use the AWSD four keys to control the cursor direction until you are satisfied and press enter.