WMFIN command

The WMFIN command is used to import windows metafiles.

Command Access:

Menu : Insert > Windows Metafiles
Command : WMFIN

Command Prompts:

Unit: unitless convert: 1.0000
Specify insertion point or [Basepoint/Scale/X/Y/Z/Rotate]:
Enter X scale factor, specify opposite corner, or [Corner/XYZ]:
Enter Y scale factor : Specify rotation angle <0>:

Function Description:

The WMF file could contain vector and rater information, but it could only export vector information. It could be inserted as block reference, the size and print style could be modified without losing resolution.

Relative Glossary:

Insertion point : Insert the copy of metafile and its basepoint to the insertion point.

X : Specify scale factors for X and Y.
Corner : Specify a rectangle by the insertion point and the opposite corner point, at the same time define the X and Y scale factors. The length and width define the X and Y scale factors. The insertion                        point is the first corner point of rectangle. The rotation angle could set the angle of WMF file.
XYZ : Scale WMF file in X, Y and Z directions. The rotation angle could set the angle of WMF file.

Scale : Specify scale factor for X, Y, Z axis. The Z axis scale factor is the absolute value for specified scale factor.
X : Specify X scale factor.
Y : Specify Y scale factor.
Z : Specify Z scale factor.
Rotate : Specify insertion angle of WMF file.