Using this function can easily draw an axonometric drawing
Operation steps:
1.Start the command.
2.Input the line width value.
3.The command line will prompt as below, input corresponding options, you can use it to switch between 0 degree and 45 degree and you can also input any angle value.
4.Enter to finish the command.
Article ID: 1051
Created: April 1, 2016
Last Updated: June 30, 2021
Author: GstarCAD Malaysia
Online URL: https://www.gstarcad.com.my/knowledge/article/draw-axonometric-line-1051.html