With FLATSHOT command you can create a 2D representation of all 3D objects based on the current view. The edges of all 3D solids, surfaces, and meshes are projected line-of-sight onto a plane parallel to the viewing plane. The 2D representations of these edges are inserted as a block on the XY plane of the UCS. This block can be exploded for additional changes.
Destination : Controls where the flattened representation is created.
Insert As New Block : Specifies to insert the flattened representation as a block in the current drawing.
Replace Existing Block : Replaces an existing block in the drawing with the newly created block.
Select Block : Closes the dialog box temporarily while you select the block you are replacing in the drawing. When you finish selecting the block, press Enter to re-display the Flatshot dialog box.
Block Selected / No Block Selected : Indicates whether a block has been selected.
Export to a File : Saves the block to an external file.
Foreground Lines : Contains controls for setting the color and linetype of lines that are not obscured in the flattened view.
Color : Sets the color of lines that are not obscured in the flattened view.
Linetype : Sets the linetype of lines that are not obscured in the flattened view.
Obscured Lines : Controls whether lines that are obscured in drawing are displayed in the flattened view, and sets the these obscured lines.
Show : Controls whether obscured lines are shown in the representation. When selected, the 2D flattened representation displays lines hidden by other objects.
Color : Sets the color of lines that lie behind geometry in the
Linetype: Sets the linetype of lines that lie behind geometry in flattened view.
Include Tangential Lines : Creates silhouette edges for curved surfaces. the flattened view.
Article ID: 1179
Created: October 13, 2016
Last Updated: June 30, 2021
Author: GstarCAD Malaysia
Online URL: https://www.gstarcad.com.my/knowledge/article/flatshot-command-1179.html