Function Description:
The DWGCHECK system variable is used to check whether there exists potential problem when opening drawings.
Type : Integer
Saved in : Registry
Initial :value 1
Range : 0,1,2,3
System Variable Value:
0 : if a drawing that you try to open has a potential problem, you are warned before the drawing is opened
1 : if a drawing that you try to open has a potential problem, or if it was saved by an application other than one based on RealDWG, you are warned before the drawing is opened
2 : if a drawing that you try to open has a potential problem, you are notified at the Command prompt
3 : if a drawing that you try to open has a potential problem, you are notified at the Command prompt. If the drawing has a potential problem and the drawing was saved by an application other than one based on RealDWG, you are warned before the drawing is opened
Article ID: 1523
Created: July 14, 2021
Last Updated: July 14, 2021
Author: GstarCAD MY /KW
Online URL: https://www.gstarcad.com.my/knowledge/article/dwgcheck-system-variable-1523.html