HPDRAWORDER system variable


Function Description:

The HPDRAWORDER system variableĀ is used to control the order of hatches and fills.

Type : Integer
Saved in : Not saved
Initial value : 3
Range : 0,1,2,3,4

The HPDRAWORDER system variable could control whether the hatches and fills are display in front of other objects or behind them; or display in front of associative boundary or behind them.

System Variable Value:

0 : none, do not specify draw order for hatches and fills
1 : send to back. Send the hatches and fills back of other objects
2 : bring to front. Bring the hatches and fills in front of other objects
3 : send behind of boundary. Send the hatches and fills behind of boundary objects
4 : bring in front of boundary. Bring the hatches and fills in front of boundary objects



Article ID: 1618
Created: July 16, 2021
Last Updated: July 16, 2021
Author: GstarCAD MY /KW

Online URL: https://www.gstarcad.com.my/knowledge/article/hpdraworder-system-variable-1618.html