Function Description:
The ORTHOMODE system variable is used to constrain cursor movement in perpendicular direction.
Type : Integer
Saved in : Drawing
Initial value : 0
Range : 0,1
When the ORTHOMODE is on, the cursor could move horizontally and perpendicularly relative to UCS and current grid rotation angle.
System Variable Value:
0 : turn ortho mode off
1 : turn ortho mode on
Article ID: 1730
Created: July 22, 2021
Last Updated: July 22, 2021
Author: GstarCAD MY /KW
Online URL: https://www.gstarcad.com.my/knowledge/article/orthomode-system-variable-1730.html