DONUT command

The DONUT command is used to create a solid circle or a wide ring.

Command Access:

Ribbon : Home > Draw > Polyline > Donut
Menu : Draw > Donut
Command : DONUT

Command Prompts:

Specify inside diameter of donut <0.5000>:
Specify outside diameter of donut<1.000>:
Specify center of donut or:

Function Description:

The ring is composed by two arc polylines; they connect end to end and form a circle. The width of ring is determined by the inside diameter and outside diameter. To create a solid circle, users could specify the inside diameter to 0.

The center of donut determines its location. After specifying diameter of donut, it will prompt to specify location of donut. Users could use FILL command to decide the current hatch style of donut.

Related tutorial video:

• Status bar related setting 00:23
• Line command 00:33
• Polar 00:39
• Edit objects + grips 00:56
• Grips System variable 00:56
• Use grips to edit objects 00:56
• Properties command 01:16
• Display and change the properties of objects 01:16
• Linetype command 01:26
• -Linetype command 01:26
• Control Line Scale 01:26
• Color command 01:33
• Change the color of an object 01:33
• Set the current color 01:33
• Polyline command 02:00
• Fillet command 02:40
• Draw Rectangles and Polygons 03:01
• Revcloud command 03:10
• Donut command 03:14
• Draw Donuts 03:14
• Edit objects + grips 03:23
• Grips System variable 03:23
• Use grips to edit objects 03:23
• ARC command 03:54
• How to draw an arc with specific arc length 03:54
• Circle command 04:42
• Concentric circle command 04:54
• Properties command 05:54
• Mirror command 05:16

Above video sources from TUTORIAL - GETTING STARTED WITH GSTARCAD, enrol now for free.

Article ID: 2097
Created: August 12, 2021
Last Updated: April 14, 2022
Author: GstarCAD MY /KW

Online URL: https://www.gstarcad.com.my/knowledge/article/donut-command-2097.html