The LIMITS command is used to set up the boundaries of grid and control its display in current model or named layout.
Command Access:
Menu : Format > Drawing Limits
Command : LIMITS
Command Prompts:
Specify lower left corner or [ON/OFF] <0.0000, 0.0000>:
Specify upper right corner <420.0000, 297.0000>:
Regenerating model.
Relative Glossary:
Lower Left Corner:
Specify the lower left corner of grid limits.
On : Turn on the limits checking. In the ON mode, users could not input a point outside of limit. For points inside of grid could be checked.
OFF : Turn off the limits checking and keep the current value to be checked next time.
Article ID: 2201
Created: August 17, 2021
Last Updated: August 17, 2021
Author: GstarCAD MY /KW
Online URL: https://www.gstarcad.com.my/knowledge/article/limits-command-2201.html