This function can extend or cut down the line to the actual intersection or apparent intersection point.
Menu : Express>GstarCAD Tools>Flex Connect
Command Entry : GXFSS
Operation sample1 :
1. Start the command.
2. Select the elongation (or shortening) of the line.
3. Specify the object to root as shown below.
4. The line will extend to the apparent intersection point as shown below.
Operation sample 2 :
1. Start the command.
2. Select the elongation (or shortening) of the line.
3.Specify the object to root.
4. The line will shorten to the apparent intersection point as shown below.
Article ID: 2731
Created: December 7, 2021
Last Updated: December 7, 2021
Author: GstarCAD MY /KW
Online URL: https://www.gstarcad.com.my/knowledge/article/flex-connect-2731.html